Browse Our Catalog

Clock Hardware - Super Savings! Save up to 34%


Super Savings! Up to 34% off on Clock Hardware at Rod Collins Construction. Top brands include Aspen Express, Quartex, TIKROUND, Takane, Hicarer, montree1 shop, August Schwer, Order shop, Mudder, WILLBOND, anbcollectibles, Walnut Hollow, & TUANTUAN. Hurry! Limited time offers. Offers valid only while supplies last.



Clock Movement Quartz - Square with 15/16'' Shaft - GAH
Clock Movement Quartz - Square with 15/16" Shaft - GAH
By Aspen Express
In Stock
$11.99

mpn: ClockMovt-1516-GAH, ean: 0013964452549,

4.2 out of 5 stars with 124 reviews
Square clock movement measures 2.125 Inches in lenght and is about 5/8 inch thick with center shaft mounted which requires an 11/32'' hole. Included with the movement: Mounting Nut, Hand Nut, Brass Washer, Rubber Washer, and Metal Hanger (which is optional if your movement has housing). This specific movement for sale has 15/16'' long shaft (the shaft lenght refers to threaded portion only). With the 15/16'' long shaft, the clock dial cannot be thicker than 13/16'' otherwise it will not


Quartex Atomic Clock Movement - 5/8 Shaft Length
Quartex Atomic Clock Movement - 5/8 Shaft Length
By Quartex
In Stock
$13.99
$13.69
You Save: 2%

mpn: 14353,

4.8 out of 5 stars with 73 reviews
Quartex Atomic quartz clock movements automatically synchronize with the official U.S. time in Fort Collins, CO up to 5 times per day. These movements are also referred to as radio controlled clock movements, and are the most accurate movements available. Auto-sets and updates for Daylight Saving Time, assuring you have the correct time every time. Use these clock movements in your next project, or replace your old quartz motors with an updated movement that sets itself! Requires 1 AA battery,


Original Youngtown 12888 Movement for Clock Repair Replacement 13.5mm Shaft Length 6mm Thread Length.
Original Youngtown 12888 Movement for Clock Repair Replacement 13.5mm Shaft Length 6mm Thread Length.
By TIKROUND
In Stock
$10.99

mpn: TICKROUND-CLOCK-011,

4.3 out of 5 stars with 92 reviews
Features: Kindly note: the product has 3 hands. The second hand has a brass cap, instead of the minute nut. For the 8th tip in the instruction, lightly screw minute nut in place can mean that if the product has the second hand, this minute nut or brass cap needn't. Please note that our package does not include the minute nut. Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds


Takane Quartz Clock Movement Mechanism With 3'' Black Spade Hands and Red Second Hand, U.S.A. Made (5/16'' threaded shaft for dials up to 1/8'' thick)
Takane Quartz Clock Movement Mechanism With 3" Black Spade Hands and Red Second Hand, U.S.A. Made (5/16" threaded shaft for dials up to 1/8" thick)
By Takane
In Stock
$10.99

mpn: tak-B/Red, ean: 0711599219543,

4.8 out of 5 stars with 66 reviews
This an accurate dependable American made movement. The movement Case measures 2-1/8''W x 2-1/8''H x 5/8''D. The shaft diameter is 5/16''. Includes 3''minute hand, hour hand, and second hand. 11/16'' threaded shaft has an overall length of 15/16'', 9/16'' threaded shaft has an overall length of 13/16'', 7/16'' threaded shaft has an overall length of 11/16'', 5/16'' threaded shaft has an overall length of 9/16''.Complete kit with mounting hardware, and wall hanger. 3'' minute hand and 2 3/4''


Hicarer 31 mm High Torque Long Shaft Clock Movement with 2 Spade Hands to Fit Dials up to 51.4 cm/20 Inches in Diameter
Hicarer 31 mm High Torque Long Shaft Clock Movement with 2 Spade Hands to Fit Dials up to 51.4 cm/20 Inches in Diameter
By Hicarer
In Stock
$14.99
$10.99
You Save: 27%

mpn: Hicarer-Clock Movement-01, ean: 0652508260143,

4.5 out of 5 stars with 123 reviews
31 mm High torque long shaft clock movement with 2 spade hands to fit dials up to 51.4 cm/ 20 inches in diameter Wide usages: These clock movements function as useful tools to DIY crafts, and they are suitable for repairing, replacing an old damaged clock or making a new one; Moreover, they are applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more. Specification: Material: plastic and aluminum Power: 1.5 V AA 1 x battery (not included)


New White Cuckoo Clock hands Set for 8 cm Dial
New White Cuckoo Clock hands Set for 8 cm Dial
By montree1 shop
In Stock
$14.98
4.6 out of 5 stars with 18 reviews
White celluloid cuckoo clock hands to fit an 8cm dial..


Continuous Sweep Mini Quartz Clock Movement - Long Shaft by Quartex
Continuous Sweep Mini Quartz Clock Movement - Long Shaft by Quartex
By Quartex
In Stock
$12.44

mpn: na, ean: 0798837391315,

4.1 out of 5 stars with 32 reviews
The second hand on this ultra-quiet clock movement moves in a smooth, continuous motion. No ticking sound to distract or interrupt you. Hanger is not molded into this clock movement. A heavy duty hanger can be used with the movement and is included. Requires 1 'AA' battery, not included. Hands included. Minute hand measures 2 1/2 inches.3/8'' Maximum Dial Thickness; 3/4'' Total Hand Shaft Length. 5/16'' Shaft Diameter. Case Size: 2 3/16'' Square x 5/8'' Depth. Minute hand measures 2 1/2 inches.


August Schwer Cuckoo Clock Pendulum hand carved
August Schwer Cuckoo Clock Pendulum hand carved
By August Schwer
In Stock
$14.99

mpn: 9.0401.02, ean: 4039212401028,

4.6 out of 5 stars with 29 reviews
Colour: Oak For following Clock types: Hand carved, five-leaves bird, five-leaves three-bird with an overall height of approx. 23 cm / 9 inch.


Winding Key, Howard Miller Original for Wall and Mantle Clocks
Winding Key, Howard Miller Original for Wall and Mantle Clocks
By Order shop
In Stock
$12.56
4.0 out of 5 stars with 17 reviews
Silver color key to wind wall and mantel clocks.. W. 2-11/16'' (6.8 cm).


Youngtown 12888 Chime Melody Pendulum Clock Movement with 2 Sets of Hands
Youngtown 12888 Chime Melody Pendulum Clock Movement with 2 Sets of Hands
By TIKROUND
In Stock
$17.99

mpn: c-006,

4.2 out of 5 stars with 117 reviews
Features: Kindly note: the product has 3 hands. The second hand has a brass cap, instead of the minute nut. For the 8th tip in the instruction, lightly screw minute nut in place can mean that if the product has the second hand, this minute nut or brass cap needn't. Please note that our package does not include the minute nut. Easy and simple design. Suitable for repairing, replacing or making a clock. Material: plastic and aluminum. Accuracy Within 30seconds deviation each month (in normal


Mudder High Torque Clock Replacement Movement, 1/2 inch Maximum Dial Thickness, 9/10 inch Total Shaft Length (Black)
Mudder High Torque Clock Replacement Movement, 1/2 inch Maximum Dial Thickness, 9/10 inch Total Shaft Length (Black)
By Mudder
In Stock
$15.98
$10.49
You Save: 34%

mpn: Mudder-Clock-01, ean: 0710560330874,

4.2 out of 5 stars with 106 reviews
Mudder High Torque Clock Replacement Movement, 1/ 2 Inch Maximum Dial Thickness, 9/ 10 Inch Total Shaft Length Features: Total shaft length is 23 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Application: Use to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Easy and simple design: The component parts easy to assemble together and the black metal


Youngtown 12888 High Torque Long Shaft Clock Movement with 207 mm/8.1 Inches Long Spade Hands
Youngtown 12888 High Torque Long Shaft Clock Movement with 207 mm/8.1 Inches Long Spade Hands
By TIKROUND
In Stock
$10.99

mpn: 12888SMC5C+N20120,

4.8 out of 5 stars with 125 reviews
Features: Kindly note: Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.. Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they


YoungTown 12888 Trigger quartz clock movement with Plastic Music Chime Box 1/2 Inch Maximum Dial Thickness, 51/65 Inch Total Shaft Length
YoungTown 12888 Trigger quartz clock movement with Plastic Music Chime Box 1/2 Inch Maximum Dial Thickness, 51/65 Inch Total Shaft Length
By TIKROUND
In Stock
$10.99

mpn: 12888SCE+N9312.904+BOX, ean: 0724509999763,

4.8 out of 5 stars with 45 reviews
Features: This is a Genuine Young Town Quartz Electronic Movement mechanism with a Step Quartz Movement with built in Hourly Trigger Switch. Perfect replacement for most Young Town Trigger movements Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Power: 1.5V AA x1 battery (not included) Dimensions: Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Total hour hand length: approx. 80 mm (3.1 inches) Total minute hand


WILLBOND Long Shaft High Torque Clock Movement Clock Motor with 7 Inch Spade Hands (Shaft Length 9/10 Inch/23 mm)
WILLBOND Long Shaft High Torque Clock Movement Clock Motor with 7 Inch Spade Hands (Shaft Length 9/10 Inch/23 mm)
By WILLBOND
In Stock
$16.99
$11.99
You Save: 29%

mpn: Willbond-High Torque Clock-01, ean: 0689749913187,

4.7 out of 5 stars with 142 reviews
Compatible clock: This set of quartz clock mechanism is applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, etc., can apply to some DIY craft clock as well. Easy to use and accurate timing: High torque clock replacement movement parts with metal hook, convenient to install and use. Specifications: Material: plastic and aluminum Power: 1 x 1.5 V AA battery (not included) Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inch) Second cap size: approx. 7 mm (0.3


Sessions Trademark Clock Winding Key Double End #6/0000
Sessions Trademark Clock Winding Key Double End #6/0000
By anbcollectibles
In Stock
$10.49
4.5 out of 5 stars with 75 reviews
My keys are American original, all the brass for my keys was forged right here in the United States. Other keys you can buy are typically made in India and do not fit antique clocks.This is a U.S.A. made unused Sessions Trademark Double end clock key, one side is for winding the clock up and the other is for adjusting the time.. This key will fit your antique Sessions mantle or wall clock.. This key is a #6/0000. Be sure to buy from Orange County Clocks, my keys are the only ones made in the


Takane Quartz Clock Movement Mechanism With 4'' Straight Hands, U.S.A. Made (7/16'' threaded shaft for dials up to 1/4'' thick)
Takane Quartz Clock Movement Mechanism With 4" Straight Hands, U.S.A. Made (7/16" threaded shaft for dials up to 1/4" thick)
By Takane
In Stock
$10.99

mpn: TAK-4"Straight-blk/SEC, ean: 0711599219376,

4.2 out of 5 stars with 88 reviews
This an accurate dependable American made movement. Movement Specifications: Case size: 2-1/8''W x 2-1/8''H x 5/8''D. Shaft Diameter: 5/16'' (8mm) Motor: Self-Start, 1 second step. Includes 4''minute hand, hour hand, and second hand. 11/16'' threaded shaft has an overall length of 15/16'', 9/16'' threaded shaft has an overall length of 13/16'', 7/16'' threaded shaft has an overall length of 11/16'', 5/16'' threaded shaft has an overall length of 9/16''.Complete kit with mounting hardware, and


LilyGlory Original Youngtown 12888 Pendulum type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.
LilyGlory Original Youngtown 12888 Pendulum type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.
By TIKROUND
In Stock
$10.99

mpn: 43237-2, ean: 0738770836221,

4.5 out of 5 stars with 39 reviews
Features: Easy and simple design. Suitable for repairing, replacing or making a clock. Material: plastic and aluminum. Accuracy Within ±30seconds deviation each month (in normal temperature). Second hand motion: Step. Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement. Max Pendulum Swing: 26° Max Pendulum Weight: 40g Max Pendulum Length: 35cm Dimensions: Case size: approx. 56 x 110 x 18 mm


Walnut Hollow Quartz Clock Movement, for 3/4-Inch Surfaces
Walnut Hollow Quartz Clock Movement, for 3/4-Inch Surfaces
By Walnut Hollow
In Stock
$7.99
$6.00
You Save: 25%

mpn: 700P, ean: 0885312124978,

4.3 out of 5 stars with 127 reviews
WALNUT HOLLOW-Quartz Clock Movement: For 19mm (3/4 inch) Surfaces. Walnut Hollow clock movements offer watchmaker's accuracy and dependability. They're suitable for repair or restoration of all kinds of clocks or use them to create your own unique timekeeper with a Walnut Hollow wood clock surface (not included). This package contains one Quartz Clock Movement and clock hands. Finish: brass. Requires one AA battery: not included. Imported.WALNUT HOLLOW-Quartz Clock Movement: For 19mm (3/4 inch)


TUANTUAN 6 PCS Quartz Clock Movements Mechanism Parts Wall Clock Cross Stitch DIY Repair Parts Kit Replacement
TUANTUAN 6 PCS Quartz Clock Movements Mechanism Parts Wall Clock Cross Stitch DIY Repair Parts Kit Replacement
By TUANTUAN
In Stock
$10.99

mpn: TH4889GUYP142657, ean: 0601715434878,

4.1 out of 5 stars with 81 reviews
Material: Plastic,Metal. Case Size: 52mm * 55mm * 17mm;Second Hand Length: 12.2cm (approximately). Power By: 1 AA battery (not included). Application: Suitable for repairing, replacing or making a clock.Applicable to cross-stitch, 3-dimensional embroidery, craft clock, frameless draw clock, etc. Package Included: 6 PCS Quartz Clock Movement Spindle Set.Material: Plastic,Metal.. Case Size: 52mm * 55mm * 17mm;Second Hand Length: 12.2cm (approximately).. Power By: 1 AA battery (not included)..


Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/8.2 Inches Long Spade Hands and Hanger (20 mm (4/5 inches))
Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/8.2 Inches Long Spade Hands and Hanger (20 mm (4/5 inches))
By Hicarer
In Stock
$13.99
$10.99
You Save: 21%

mpn: Hicarer-High Torque Quartz-01, ean: 0652508259529,

4.2 out of 5 stars with 102 reviews
High torque quartz clock movement replacement parts with 208 mm/ 8.2 inches long hands and hanger Wide application: These clock movements are function as good tools for DIY design, have the clock designed and made by yourself; Suit for repairing, replacing the damaged clock or making a new one; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more. Specification: Material: plastic and aluminum Power: 1 x 1.5 V AA battery (not included) Case size:



Viewing Page 1 of 5

View more products in Hardware.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - rodcollinsconstruction.com. All Rights Reserved.